CPC(D)Y-35B vs CPC(D)Y-35F
Two sizes of the same frame. The difference that decides the order is usually aisle width or the weight of a full pallet — not the number on the plate.
| CPC(D)Y-35B | CPC(D)Y-35F | |
|---|---|---|
| Model | CPC(D)Y-35B | CPC(D)Y-35F |
| Rated capacity | 3.5 t | 3.5 t |
| capacity | 3.5 t | 3.5 t |
| standard | ||
| power | Diesel, four-wheel drive | Diesel, four-wheel drive |
Rows that differ are marked. Rows without a mark are identical on both builds.
Choose CPC(D)Y-35B when
Rear-articulated 3.5 t. The frame steers behind the operator, so the load stays over the rear axle on a muddy stockpile and the truck turns inside a yard where a rigid chassis would need three passes.
The building is the constraint: floor loading, door width, or a mezzanine that will not take the heavier chassis. CPC(D)Y-35B is also the cheaper unit, so a fleet that never loads to the plate should not pay for the frame it does not use.
CPC(D)Y-35B specificationChoose CPC(D)Y-35F when
Front-articulated 3.5 t. Steers ahead of the operator for a tighter turning circle on hardstanding and a shorter approach to a stack; the trade is a wider swept path at the rear.
The load is the constraint: pallets that arrive over-weight, attachments that shift the centre of gravity forward, or a mast tall enough that residual capacity falls away at height. Buying one size up is cheaper than a second handling step.
CPC(D)Y-35F specificationNot sure which one
Send the aisle width, the load and the lift height. We answer with the model and the reason, not both brochures.