CPD-20 vs CPD-25
Two sizes of the same frame. The difference that decides the order is usually aisle width or the weight of a full pallet — not the number on the plate.
| CPD-20 | CPD-25 | |
|---|---|---|
| Model | CPD-20 | CPD-25 |
| Rated capacity | 2 t | 2.5 t |
| Lift height | [object Object] | [object Object] |
| capacity | 0.5 t | 0.5 t |
| standard | ||
| power | Electric | Electric |
Rows that differ are marked. Rows without a mark are identical on both builds.
Choose CPD-20 when
Four-wheel, 2.0 t. The specification most cold stores and food plants settle on: enough capacity for a double-stacked pallet, small enough for a 3.5 m aisle.
The building is the constraint: floor loading, door width, or a mezzanine that will not take the heavier chassis. CPD-20 is also the cheaper unit, so a fleet that never loads to the plate should not pay for the frame it does not use.
CPD-20 specificationChoose CPD-25 when
Four-wheel, 2.5 t. For loads that sit between pallet and stillage. Frequently chosen where a 2.0 t truck is marginal on residual capacity at height.
The load is the constraint: pallets that arrive over-weight, attachments that shift the centre of gravity forward, or a mast tall enough that residual capacity falls away at height. Buying one size up is cheaper than a second handling step.
CPD-25 specificationЕсли не знаете, какая
Send the aisle width, the load and the lift height. We answer with the model and the reason, not both brochures.